Welcome - Explore my Blog

I've been keeping this blog for all of my beekeeping years and I am beginning my 19th year of beekeeping in April 2024. Now there are more than 1300 posts on this blog. Please use the search bar below to search the blog for other posts on a subject in which you are interested. You can also click on the "label" at the end of a post and all posts with that label will show up. At the very bottom of this page is a list of all the labels I've used.

Even if you find one post on the subject, I've posted a lot on basic beekeeping skills like installing bees, harvesting honey, inspecting the hive, etc. so be sure to search for more once you've found a topic of interest to you. And watch the useful videos and slide shows on the sidebar. All of them have captions. Please share posts of interest via Facebook, Pinterest, etc.

I began this blog to chronicle my beekeeping experiences. I have read lots of beekeeping books, but nothing takes the place of either hands-on experience with an experienced beekeeper or good pictures of the process. I want people to have a clearer picture of what to expect in their beekeeping so I post pictures and write about my beekeeping saga here.Master Beekeeper Enjoy with me as I learn and grow as a beekeeper.

Need help with an Atlanta area swarm? Visit Found a Swarm? Call a Beekeeper. ‪(404) 482-1848‬

Want to Pin this post?

Thursday, September 04, 2008

Close, But no Cigar

I'm sure at least some of you are waiting with bated breath to see if pour number 9 did the trick. I bought a new pan for it and poured it very carefully, having greased the pan and with the pan sitting in a hot water bath. Everything looked good when it first came out of the mold - see the lovely corners and smooth sides?


But when I looked at the top of the block (the bottom of the pour), there was a dark spot of debris and several wax places that were not smooth.



So tonight I poured number 10 in a glass pan this time - we'll see in the morning if it turned out OK. Since it's a 6 cup pan, I'm also a little worried that the block won't weigh enough (assuming it comes out flawless). The block has to weigh 2 pounds minimum.



Cross your fingers! I don't want to do pour number 11!

Posted by Picasa

6 comments:

  1. You're certainly a lot more patient with this than I am. Hopefully it will pay off!

    ReplyDelete
  2. Anonymous11:48 AM

    I've been following this adventure and wonder why you can't try cooling it in the oven. Is that even possible or perhaps it would not make a difference.

    Just a thought...

    ReplyDelete
  3. Anonymous10:47 PM

    I have too much time on my hands and looked up the density of bees wax (at 15 °C is 0.958 to 0.970 g/cm³.) then I did the math and you should be good to go. Its not really that much lighter then water and I'm guessing you don't need much more then 2 pints to make 2 pounds (a pints a pound the world around)

    ReplyDelete
  4. Thanks for all the input....I think the problem is about how I am lubricating the mold pan - the cooling is gradual and takes place in a pan of boiling water, so I don't think the oven would change anything, but I do need to figure out how to "grease" the pan in such a manner that it doesn't leave divots in the wax and so that the wax doesn't stick. People (according to the Internet) use Crisco, PAM, and dishwashing detergent. I'm going to try dishwashing liquid again and the glass pan which makes a beautiful block (but pour number 9 isn't right either....)

    ReplyDelete
  5. Have you tried a silicone-based lubricant? I don't know if it would work but it might be worth a shot.

    ReplyDelete
  6. Anonymous12:36 PM

    Maybe a candle mold release spray. I just purchased this spray from Mann Lake to use on my candle molds. Perhaps worth a try.

    ReplyDelete

Pin this post

LinkWithin

Related Posts Plugin for WordPress, Blogger...