Welcome - Explore my Blog

I've been keeping this blog for all of my beekeeping years and I am beginning my 18th year of beekeeping in April 2023. Now there are more than 1300 posts on this blog. Please use the search bar below to search the blog for other posts on a subject in which you are interested. You can also click on the "label" at the end of a post and all posts with that label will show up. At the very bottom of this page is a list of all the labels I've used.

Even if you find one post on the subject, I've posted a lot on basic beekeeping skills like installing bees, harvesting honey, inspecting the hive, etc. so be sure to search for more once you've found a topic of interest to you. And watch the useful videos and slide shows on the sidebar. All of them have captions. Please share posts of interest via Facebook, Pinterest, etc.

I began this blog to chronicle my beekeeping experiences. I have read lots of beekeeping books, but nothing takes the place of either hands-on experience with an experienced beekeeper or good pictures of the process. I want people to have a clearer picture of what to expect in their beekeeping so I post pictures and write about my beekeeping saga here. Along the way, I've passed a number of certification levels and am now a
Master Beekeeper Enjoy with me as I learn and grow as a beekeeper.

Need help with an Atlanta area swarm? Visit Found a Swarm? Call a Beekeeper. ‪(404) 482-1848‬

Want to Pin this post?

Sunday, March 21, 2010

What is a Follower Board?

My top bar hive includes two follower boards. My understanding of the follower board is that it is used to demarcate the beginning and end of the hive. (Note that my top bar hive doesn't have a bottom yet.)

Here is the first follower board that will be located at the end of the hive.

In the picture below you can see a number of top bars with the follower board showing at the end of the hive.

When I first install a swarm in this hive, the bees won't need to occupy more than about eight to ten bars. If I left the entire 48 inches open, they would have too much space to defend and would have lots of room to make a mess with burr comb. Instead I'll use the other follower board to end the hive, as you can see in the picture below.

Over time, I'll continue to move this outer follower board as I add top bars to the hive. Conceivably the hive could fully occupy the length of the hive I am providing for them.

I lack three things to make this hive operational now. I need to put on the hive bottom (Monday morning's task since I don't go to work until noon tomorrow); I need to cut the plastic you can see curving behind the hive to make the top of the hive; I need to catch a swarm.
Posted by Picasa


  1. How neat...I always wondered how the bees knew where to be at in the hive

  2. This will be my third season with a top bar hive A La Phil Chandler.

  3. I am so excited about this top-bar hive. When I am able to keep bees I might go this route. I like how natural it seems in comparison to the other hive option. I am excited to see the finished product! I hope you get a swarm!

  4. I'm building a top-bar hive, but

    from you pictures, ... I'm not clear where your bee entrance is located.

  5. I do have a hole drilled in the side, visible on the right in the last picture. However, you don't have to have an entrance for a top bar hive - just push the first follower board away from the side of the box about 1/4 - 1/2 inch and the bees will enter and leave that way, according to Michael Bush's website.

  6. i'am doing my first TBH and not sure where to put the follower boards when installing a new bees


Pin this post


Related Posts Plugin for WordPress, Blogger...