Welcome - Explore my Blog

There are over 1170 posts on this blog. Please use the search bar below to search the blog for other posts on a subject in which you are interested. You can also click on the "label" at the end of a post and all posts with that label will show up. At the very bottom of this page is a list of all the labels I've used.

Even if you find one post on the subject, I've posted a lot on basic beekeeping skills like installing bees, harvesting honey, inspecting the hive, etc. so be sure to search for more once you've found a topic of interest to you. And watch the useful videos and slide shows on the sidebar. All of them have captions. Please share posts of interest via Facebook, Pinterest, etc.

I began this blog to chronicle my beekeeping experiences. I have read lots of beekeeping books, but nothing takes the place of either hands-on experience with an experienced beekeeper or good pictures of the process. I want people to have a clearer picture of what to expect in their beekeeping so I post pictures and write about my beekeeping saga here. Along the way, I've passed a number of certification levels and am now a!
Master Beekeeper Enjoy with me as I learn and grow as a beekeeper.

Need help with an Atlanta area swarm? Visit Found a Swarm? Call a Beekeeper.

Want to Pin this post?

Friday, April 11, 2008

How to Install a Nuc

In addition to my two hives from last year and the two swarms I have kept of the three that I captured, I had for insurance ordered three nucs for the season. They arrived yesterday and I drove down to Forest Park, Ga to pick them up last night. The nuc comes with a screened front door in a five frame box. You pick the nuc up in the evening so that the bees will be at home. I drove them home, set them in the spots where they will be hived, opened the screened door and that was that for the evening.

The weather this weekend includes rain and cold - actually the rain was supposed to start today, but we were lucky and had sunny weather instead (the better to install nucs with, my dear). I took my prepared box down to the site where the nuc was to be installed. This is a 10-frame deep and the nuc includes four frames so you can see that the box has four frames out of it to accommodate the frames from the nuc.
Here's the nuc still with the top bungee-corded to it, awaiting my transfer to the hive box. When you make the frame transfer, it's essential to put the frames in the same order in which they were in the nuc box. A nuc is made up of four frames from different hives, usually, so as you can see here, the frames were three of wood and one plastic. I set them into the box and then sharply tapped the nuc box over the hive so that the remaining bees would join their sisters.

All the bees never leave the original equipment when you're doing these maneuvers, so you always have to leave the nuc box and any other bee-clinging equipment sitting in front of the hive until all the bees are moved into the hive (that will probably be tomorrow morning.) After the bees calmed down, I put a feeder on each new box.

Thanks to my friend Tracy for the glorious blue and yellow paint. He's building a house and was kind enough to give me quarts of paints that didn't make the cut. I love my blue and yellow hives!

So in case you haven't been counting, I now have seven (7!!!!!) hives. Bermuda who has lived through two winters and is entering her third season, Mellona, entering her second season, two swarm hives, as yet unnamed and now these three nuc installations. I'll be working on Greek and Roman mythology tonight to try to find names for all of these.

Posted by Picasa

20 comments:

  1. Hi,
    Thanks for your informative post. I am getting ready to install a nuc of bees on Friday. A couple of questions for you:
    1. Do you use smoke when you are installing the nuc? OR just suit and veil up and use gloves to move the frames? From my several mentors, the use of smoke in this process is controversial (some say yes for a beginner, some say, no, no, never use smoke...)I want to have time to try to look for the queen, so maybe some smoke will calm them down for that? Any ideas...

    2. Should I put an entrance reducer on the hive once the nuc is installed? I have mice in my garden and was hoping to keep them out with the entrance reducer. It is also really cold and wet out here right now (but many carry on with bees nonetheless, we have our state bee field day this weekend...)

    Hope you can give some feedback! Thanks, Lisa

    ReplyDelete
  2. To question 1: I don't use smoke when I am installing a nuc. I always suit up when I am working with the bees or at least I always wear long sleeves, my veil and gloves. I get a large local reaction to stings so I try to protect myself. But in installing a nuc, you'll be able to see the queen, if you look hard for her, but won't need smoke.

    As a matter of fact, I rarely use smoke for anything other than an announcement of my presence. I light my smoker on a hive inspection just so I can blow one puff of smoke into the door of each hive I am inspecting. The other time I use smoke is to smoke myself when a bee is a particularly vigorous guard and I want her to leave me alone.

    2. I would ask your local beekeeping organization about the entrance reducer. I think people sometimes staple #4 hardware cloth to the entrance to keep out mice, but you'd have to ask someone other than me. If I were a mouse I'd gnaw or push the entrance reducer aside if I wanted to get into the hive.

    I've used an entrance reducer in three occasions: to leave the hive less open in the winter, to keep robbers out when I had a robbing problem, and to reduce the amount of entrance a hive had to protect when the colony was very small.

    ReplyDelete
  3. thanks so much, that is so helpful!
    the comments about the smoke was basically what one of the bee experts here told me, but another one said that beginning beekeepers should use smoke more often until they get the hang of it.
    I will look into the issue of the entrance reducer. I've placed my hives a foot or so off ground so hopefully it will make it harder for the mice to jump up there! (but mice are very crafty...)

    thanks again, good luck with your bee season!

    ReplyDelete
  4. christie12:43 AM

    Wonderfully helpful, as I pick up my first nuc in the morning! Thank you! What a terrific find your blog is! Ciao from Spokane, Washington

    ReplyDelete
  5. I pic up 2 nucs this morning and am very nervous because it is rainging:(
    I really have no choice tho. Wish me luck...
    Mary Jane from Malvern AR

    ReplyDelete
  6. That's the EXACT color I just painted my hive boxes! Thanks for the tips about installing a nuc. "Beekeeping For Dummies" and Kim Flottum's book don't explain it at all, strangely.

    ReplyDelete
  7. Is it advisable to install a nuc in a new hive and a package of bees in a very nearby new hive at about the same time? Will there be a robbery?

    Rich from MT

    ReplyDelete
  8. Hi Rich, putting two hives in at the same time is fine.

    ReplyDelete
  9. Anonymous4:11 PM

    My hive died....dead bees stuck to comb, ants in the hive and feeder and mildew on bottom board. Now what? Do I toss that hive and feeder and bottom board, or can I scrub it for my new nuc that is arriving tomorrow? I can't figure out how to post my name...that's why it's anonymous.

    ReplyDelete
  10. As long as they didn't die of foulbrood, you can clean it up for the new nuc. If you have any doubts about the cause of death - sounds like starvation - then use a propane torch to scorch the inside of the hive and use it as if new.

    ReplyDelete
  11. Linda, I'm a newbee and have ordered a Top Bar Hive (being made) and will make my Spring 2012 order of bees soon.(now November '11) My source has informed me they have nucs, not packages. What would I do differently with a TBH when installing bees from a nuc? The frames would not be the same shape as the TBH so would not 'fit'. I've emailed my sourse, but they haven't answered. Maybe they don't like TBHs.lol
    Thanks, Lin (short for Linda):)

    ReplyDelete
  12. It's too late to help Lin (in comment above) but I feel bad I didn't answer. A top bar hive requires a package for installation. The frames in a nuc will not fit into a top bar hive. If you are doing a top bar, most people order packages. If you order a nuc, you just about have to install it into a deep Langstroth box....unless you've made special arrangements with your seller.

    ReplyDelete
  13. Anonymous11:03 AM

    Do you put the queen excluder on top to stop her getting onto the crown board?

    ReplyDelete
  14. The only good use I've found for a queen excluder is to use as a drain rack when I cut cut comb honey. I never use one on my hives. Well, once I did to prove that the hive had two queens - one in the top of the hive and one in the bottom, but that's the only time I've used a queen excluder in my bee hives.

    ReplyDelete
  15. Anonymous9:12 PM

    I just got my first nuc and it is cold and raining (in the 40's). Tomorrow it will rain all day plus only reach a high of 54. It won't reach 60 degrees until Sunday afternoon (day after tomorrow). I understand that it is preferable to install the bees in their new hive early in the day, so my question is, should I wait till 3 PM on Sunday when it is 60 degrees, or do it earlier on that day when it is colder (in the upper 40's and lower 50's)?

    ReplyDelete
  16. Wait until Sunday afternoon when it is 60. It would be unfair to the bees to do it in the cold. You should open the entry of the nuc and have the nuc sitting on top of the hive where they will be installed. That way they can come and go (which they probably won't want to do in the cold and rain) but they will be in a better mood when you install them in the afternoon. And they will be oriented to the hive location.

    ReplyDelete
  17. Anonymous9:28 AM

    Thanks so much.

    ReplyDelete
  18. We are picking up our first nucs in a few weeks. I can't wait to install them! I've only installed bee packages in the past. I am so excited!

    ReplyDelete
  19. Anonymous1:09 PM

    I installed a two frame nuc two weeks ago. The bees are still
    congregated on the original frames and are not drawing comb
    on the adjoining new foundation and frames. Should I worry?

    ReplyDelete
  20. The bees can't draw wax if there isn't a nectar flow. In Atlanta, the tulip poplar had a very short bloom period and we are out of the nectar flow so my bees aren't drawing comb. If there isn't any food in your area (you don't say where you are), then you may have to feed the bees. Generally after the main nectar flow, nectar continues to come in, just not in as large quantities.

    ReplyDelete

Pin this post

LinkWithin

Related Posts Plugin for WordPress, Blogger...