Welcome - Explore my Blog

I've been keeping this blog for all of my beekeeping years and I am beginning my 19th year of beekeeping in April 2024. Now there are more than 1300 posts on this blog. Please use the search bar below to search the blog for other posts on a subject in which you are interested. You can also click on the "label" at the end of a post and all posts with that label will show up. At the very bottom of this page is a list of all the labels I've used.

Even if you find one post on the subject, I've posted a lot on basic beekeeping skills like installing bees, harvesting honey, inspecting the hive, etc. so be sure to search for more once you've found a topic of interest to you. And watch the useful videos and slide shows on the sidebar. All of them have captions. Please share posts of interest via Facebook, Pinterest, etc.

I began this blog to chronicle my beekeeping experiences. I have read lots of beekeeping books, but nothing takes the place of either hands-on experience with an experienced beekeeper or good pictures of the process. I want people to have a clearer picture of what to expect in their beekeeping so I post pictures and write about my beekeeping saga here.Master Beekeeper Enjoy with me as I learn and grow as a beekeeper.

Need help with an Atlanta area swarm? Visit Found a Swarm? Call a Beekeeper. ‪(404) 482-1848‬

Want to Pin this post?

Sunday, June 10, 2007

Honey Harvest - Crush and Strain

Today I harvested the six frames I took out of Proteus to make room for brood (if there's a queen in the bottom box). When I did the crush and strain, I made one of
my videos.



Please let me know if you have any questions or comments about this way of harvesting honey.

By the way, after the honey had completely filtered, I got about 5 pounds more in bottles. This means that the six frames of honey from a shallow super harvested in this video yielded approximately 17 pounds of absolutely delicious honey, uncontaminated by heat or being slung around in the air...or about 2.8 pounds per frame.

62 comments:

  1. Anonymous11:32 AM

    Your video was very nicely done. You're doing wonderfully for a one person outfit.

    I'd never heard of this method. It makes me wish we hadn't gone with plastic frames. I suppose we could still do something similar, but having all wax foundation as you have would be much easier.

    Thank you for your video.

    ReplyDelete
  2. People have been known to do this with plastic - you just scrape the comb off of the plastic and go from there. But it is easier with wax foundation and no wires. Michael Bush crushes the comb with his hands - I think if I did it that way, I would have to harvest somewhere other than my kitchen!

    ReplyDelete
  3. Great video! I'm new and have read a million things but it's nice to have a visual aid to make sure I'm doing things right. Thanks for posting!

    ReplyDelete
  4. Linda, I hope that I will be able to have honey in a month or so to do crush and strain with!

    I will no doubt come and watch this video again to figure out how to do it--thanks a lot!

    ReplyDelete
  5. Anonymous11:16 PM

    Linda,Having 8-10 hives myself,I know how much work goes into keeping bees. It's great that you also take the time to record what you are doing so that other people can see. I've done some video and pictures but never seem to get around to organizing it. You've obviously put much time and effort into this site and it shows. I will be sure to check back often. berkshire bee

    ReplyDelete
  6. Anonymous5:31 PM

    Linda,
    Awesome videos!!!
    I started keeping bees last year too and I just pulled my first supers of honey this weekend(it's in the freezer till I get time to extract). I have an extractor but am planning on doing some cut-comb and will employ your methods. Thanks a million for taking the time to make these videos. For only your 2nd year I think you are doing amazingly well. Thanks for the honey contest tips too.
    Tom

    ReplyDelete
  7. Anonymous11:01 AM

    Hi Linda,
    I started with five hives in my frontyard on Dec 1st, 2007 ,so I am new to this.
    I was planning to purchase an extractor soon but your video gave me enough confidence to try your alternative.
    Thanks and all the best with your adventure.
    Sunny Jamaica

    ReplyDelete
  8. Anonymous8:24 AM

    I am going to start with a TBH, so I found your video extremely useful and well done. enrico_ from near Bologna, Italy

    ReplyDelete
  9. Anonymous7:33 PM

    Thanks so much for this great video! What do you do with the wax after honey stops dripping out of it? Does it simply go outside for the bees to clean up, or is there a way to get it out, maybe when you melt the wax down?

    ReplyDelete
  10. I usually put the leftover wax in my solar wax melter (see video on sidebar) and melt it down. I wash it first and beekeepers say that you can use the rinse water to feed back to the bees, although I have never done that.

    ReplyDelete
  11. Anonymous1:29 AM

    Linda class act. you say strain, is the bucket empty just crushed wax? my seve straining is much slower, days. In 90 degree heat. was the bucket prefab with cut of valve? Thanx for sharing I felt like I was only fool doing thisZeke

    ReplyDelete
  12. Zeke, When the honey is all strained out, if you have done a good job of crushing the comb, all that's left in the sieve is the crushed wax (a little honey in unbroken cells, but a very little). I do rinse the wax before putting it in my solar wax melter (see video on that). In 90 heat, the whole bucket strains through quite quickly. If the temp is lower, the straining takes longer. I just put the bucket with a brick on top of it out on my sidewalk and leave it for the day. And yes, the bucket came from Dadant with the hole already cut in the side and the valve to screw into the hole. They sell the bucket and a three filter set for around $30.
    Good luck! Linda T

    ReplyDelete
  13. Anonymous8:07 AM

    Thanks for a nice website.
    But I wonder if there is a problem with the video. I would really like to see it, but it is now just a black box.
    Thanks

    ReplyDelete
  14. I'm checking on the problem - thanks for letting me know.

    LT

    ReplyDelete
  15. Anonymous3:09 PM

    Thanks for "fixing" the video link.
    It was nice to watch,

    ReplyDelete
  16. This is the second video of yours I have watched. You speak so clear and calmly and give such great details.

    I have no bees but want to watch all your videos to educate myself.

    Q. How do you get different honey flavors? I prefer Orange Blossom but most stores here in AZ sell Clover which I don't care for. What flavor is your honey??
    Thank you for sharing your knowledge!

    ReplyDelete
  17. This is very informative! Thank you!

    ReplyDelete
  18. how long does it take to harvest honey from TBH. I am new to the field and i have two TBH and the bees entered on december 2008. mohamed, kenya

    ReplyDelete
  19. There's no simple answer to how long does it take to harvest honey - if you mean when will the honey be ready, then the answer is you harvest honey when the bees have fully capped the cells - that is true in a TBH or a Langstroth. If you mean when will the bees have capped honey ready from when you started the hive, that is up to the bees, the weather, the nectar flow, etc. I just watch the combs to see when they are fully capped. In Atlanta when the nectar flow starts in March/April and is over at the end of June, I usually harvest on the 4th of July or near to that date. If you mean how long does the harvest process take, that depends on how much you have to harvest. With the crush and strain method, one super usually fills a filter bucket so with only one bucket I can only do one super per day, but with two buckets, I can harvest two per day, etc.

    Linda T

    ReplyDelete
  20. Thanks Linda you answered my question it is about the durations bees take to make honey.Thanks for the Superb video on crush and strain it was informative and educating.i have learn the process of extracting honey from the wax.

    ReplyDelete
  21. Hi Linda,

    Thanks for all of your help. My question is after you harvest in July, are you done for te season. I move to my land in north Houston in July, and I was considering putting out boxes then, but I don't know if it is a futile endeavor.

    ReplyDelete
  22. shellinrio, Every part of the country has differences in terms of the honey flow. In Atlanta our season starts in April and ends pretty much in July although some parts of Georgia get a fall flow as well. Some parts of Texas, Florida, etc. get honey all year long. You might check with your local bee club to find out what your expectations can realistically be for north Houston.

    ReplyDelete
  23. Anonymous10:11 PM

    Linda,Very interesting. I have been contpating beekeeping for some time. After seeing this,I get my hopes up again that someday I will get into it.

    ReplyDelete
  24. Very helpful video Linda.
    Is that a 9" X 13" pan? Also did you cut the silicon cutting sheet to fit the pan? The sheets I saw in the store were much larger.
    thanks

    ReplyDelete
  25. The pan is a Caphalon 12X18 pan that I got from Target on sale. The silicon sheets fit perfectly in it. Although with a smaller pan, I'm sure cutting the silicon would work just fine. I like the roominess of the pan for cutting out the honey - it can fall into the pan without pieces missing and landing on the counter!

    ReplyDelete
  26. Anonymous9:17 AM

    Linda, you are a wonderful person to share your knowledge and experience with the rest of us. Thank you so much. I'm contemplating starting beekeeping and your videos are very enjoyable

    ReplyDelete
  27. Anonymous9:42 AM

    Linda, Great video and instruction. could you tell be about the straining bucket? What type and how many strainers are you using. I have seen the bucket kits that have 3 strainers (Course,Medium,& Fine)Is this what you use?

    Thanks again

    ReplyDelete
  28. I use the 3 set strainers, each set inside the other from coarser on the top to finest on the bottom. I got the set from Dadant. It comes with the bucket which is equipped with a honey gate - I've been very pleased.

    ReplyDelete
  29. Anonymous1:25 PM

    I notice that you can fill a bucket with an entire super, so your filter is down near the bottom? My bucket & filter set is wired with a frame that rests on the rim of the bucket, so I can only mound up about 2 frames, and then I can't get the lid on anyway, as the frame rest is in the way! I believe that I have the same contraption as you - did you modify yours in some way?

    ReplyDelete
  30. Hi, My filter set sits inside the rim of the bucket. I don't know what you mean by the frame rest being in the way. Did you watch the video? I crush the honeycomb (the wax with honey in it) and then pour that into the filters. I can easily put one super's worth of frames into the filter set. When one super's worth of honey has filtered through, it fills up about 1/3 of the bucket. I got the bucket and filter set from Dadant ($31) and Brushy Mountain sells the same set for a little less.

    ReplyDelete
  31. hi Linda......I'm in my 2nd summer of beekeeping and your blog is so helpful! Thank you for all the good information you are sharing. My wax foundations have wire in them; can I crush and strain with wire? I want to start letting the bees build their own foundation in future.

    ReplyDelete
  32. If you have wax foundation that is wired in, of course you can crush and strain - you'll just cut around the wire and the comb should fall out of the frame just fine.
    Next year, you won't need to use the wire.

    ReplyDelete
  33. Thanks so much! :) Have you read Gunther Hauk's little book, Toward Saving the Honeybee? He advocates letting the girls build their own foundation too....

    ReplyDelete
  34. Followed your instructions and it worked out perfectly! Thanks so much! Beth, Columbus, OH

    ReplyDelete
  35. Hi Linda! Just wanted to let you know I crushed 2 frames of honey today and it's straining in the sun now. Thank you so much for showing the way to do this. The silicone mat is a wonderful tip! I've never tasted more delicious honey....the girls did a great job!

    ReplyDelete
  36. Thanks, Jane. I put the video up because I had to reinvent the wheel when I tried it the first time and didn't want others to have the same difficulties - Glad it worked for you.

    ReplyDelete
  37. Hallo Linda, nice, verry nice. Dog with honey, delicious!
    Greetings Wolfgang
    www.lieblingsimker.de

    ReplyDelete
  38. The other day i had 500 to a thousand bees work their way into my black plastic composer..I want to know if anyone knows if i leave them in there will they make a hive and produce honey. i don't want to kill them..bad karma..would love some honey but not sure what to do,,,,can anyone help me...here is my email address....latankayaia@gmail.com
    i am truly grateful for any advise...
    Terri

    ReplyDelete
    Replies
    1. Anonymous11:09 PM

      Today I had a professional bee keeper come to remove the thriving bee colony from our rotating drum style composter. It took her four hours to get a many of them as she could. She was exhausted and told me that it was four times larger than what she had thought it would be. She gave me two pounds of the honey with comb. I can't imagine how much more she was able to remove, but I'll bet much, much more. This is not a cheap service, but I did not want to call an exterminator and have a good colony killed. The bees had only been there for about 6 months. I feel like it was good karma for the bees to have to set up shop in our composter. Good Luck.

      Delete
    2. Anonymous11:22 PM

      Today I had a professional beekeeper remove a thriving colony from my black rotating drum composter. It took her almost four hours to do this and she told me that it had been four times larger than what she had thought it would be. I asked for a bit of the honey (for bragging rights) and she handed me back my container with two pounds of honey plus comb. I cannot imagine how much she was able to extract. Bee removal service is rather expensive but she earned every single penny and I certainly did not want them killed. Extermination is probably cheaper because it would be easier... I felt like it was good Karma to have the bees set up shop in my composter. I just could not keep them there. Good Luck!

      Delete
  39. Anonymous9:49 PM

    Just curious why you would use this method? The poor bees burn up a lot of honey in producing new comb. It is much more efficient and easier to extract the honey so you can put the combs back on the hives and the bees can reuse them. I have some comb that I'm sure is nearing twenty years that I've just uncapped, extracted and then put back on the hives.

    ReplyDelete
  40. There are any number of reasons to harvest this way that are covered in this and other posts I've put up - if you are putting 20 year old comb back in the hives, that's certainly old comb and most of the research today says that comb should be replaced at the minimum of every five years.

    ReplyDelete
  41. Linda i thank you for all of your efforts in the composition of such an informative and cost efficient method for the backyard beekeeper to extract his/her honey.

    Thanks a million for taking the time to compose and upload the video for our learning, there really isn't anything comparable to your videos on the net. Really there aren't.

    I appreciate your hardwork and everything that has gone into this blog, you are the pioneer in the beekeeping blogosphere, without a doubt.

    If you don't deliver another post in this blog it still contains boat loads of knowledge for both newbies and veterans alike to glean from.

    Thanks a million!

    Chris Harrell
    Quackycalls.com
    Eastern North Carolina

    ReplyDelete
  42. Linda,

    You're videos are so helpful! I am so relieved to see your step by step, low-cost ways to harvest honey, melt wax, etc. Thank you!!

    I noticed that you filtered the honey once - is that correct? I have read that it should be filtered a few times so that the honey is less likely to crystallize.

    What do you think?

    Thanks,

    Carrie (Urban Beekeeper in Louisville, KY)

    ReplyDelete
  43. Carrie, These days I stack three filters, one inside the other (Dadant sells them as a kit.) Then when I filter, although I ostensibly filter once, the honey is going through three levels of increasing fineness of filter before it hits the bucket to be bottled.

    ReplyDelete
  44. Thanks for this - much appreciated.

    ReplyDelete
  45. thank you for posting this terrific & helpful video, linda! i crushed comb last year and made a huge mess. i'll definitely try your way this year!

    question: is there a reason you don't let the honey sit (after filtering) for 12-24 hours in the bucket to settle before bottling/jarring? this was recommended to me to help the air bubbles rise to the top before bottling. decreases crystallization????

    ReplyDelete
  46. Anonymous8:07 AM

    Agree excellent video that I watched more than once, but one clarification, I have beeswax foundation, when scraping, does the foundation stay put and remain in the frame or does it become part of the honey/wax blend that you strain out?
    Thanks again Linda.

    ReplyDelete
  47. If you are using beeswax, then the bees incorporate the beeswax foundation into the comb. You cut the comb off of the frame (you won't be able to tell what is foundation because it is now part of the honeycomb) as the video illustrates and crush all of it.

    ReplyDelete
  48. Anonymous8:37 AM

    thats what I thought, but just wanted to double check, appreciate the confirmation-and quick response.

    ReplyDelete
  49. Thankyou so much Linda for this excellent, beautifully narrated, clear and concise video! I am a noob beekeeper and will use your method. I have a Langstroth with plastic frames but will scrape the wax and honey off as you suggest. Next year I will add a second hive and will try out a top bar setup. Thanks for all your teachings, I love your blog!

    ReplyDelete
  50. Okay, I think we finally have some honey to harvest. (well, some capped honey comb that they built crooked that needs to be removed). Rookie question, how do you get the frame out without bringing all the bees with you? Is that where the bee brush comes in? I tried searching your site, but couldn't get a good hit, or was using the wrong search criteria. Thanks!

    ReplyDelete
  51. Thank you so much, this was really helpful. We are brand new beekeepers :).

    ReplyDelete
  52. Thanks for this video. We started 2 Langstroth and one Top Bar hive this year to see what we prefer. I'm so excited to see that I don't necessarily need to purchase a ton of extraction equipment in order to get the honey from the Langstroth hives!

    ReplyDelete
  53. Thanks so much for this video! We just removed a ten year hive from our guest house wall. We have a 5 gallon plus bucket of comb that was nice and I wanted to process it. This was a wonderful way for all of us (family) to get involved. We are going a bit more low-tech and frankly, I don't care about the little bits in the honey from our larger screen.

    ReplyDelete
  54. Diana4:37 PM

    I was so glad to see this video of your. I have tried to crush and strain before with such a messy result! My problem is that after straining (which I let sit for weeks to strain it all), my honey is solid. Is this crystallization or could it be that here in 100 degree Texas, some of the comb melted into the honey? This was the first time I had harvested and am so disappointed.
    Today, I used the method you so wonderfully demonstrated and let it strain for a couple of hours and got liquid honey. I hope it stays that way!
    Thanks for all you do for us newbees.

    ReplyDelete
  55. Anonymous1:34 PM

    Linda, in the video the buckets were on your porch—dog was checking it out—didn’t that attract bees or do you have your bees in a out-yard?

    ReplyDelete
  56. The buckets are on my porch but they are closed up (the top is on the bucket and the honey gate is screwed tightly shut) and the bees aren't particularly interested. The dog was just noticing that something was on the landing that usually wasn't there. In that video, my bees are about 20 feet from the bucket.

    ReplyDelete
  57. Diana, You may have posted this long ago - since this is a 2007 post, but people visit it every day, so I am going to answer your question and hope it's useful to someone else. Whether honey crystallizes or not has to do with the content of the honey - what the nectar source was. Sourwood honey and tupelo honey do not crystallize but most honeys do. I've never gotten a jar from the west that wasn't solid rather than liquid. So leaving your honey for weeks with a nectar source that crystallizes will certainly result in that happening. Put your honey in a pan of hot water if you want it to go back to liquid. Or spoon it up as is and enjoy!

    ReplyDelete
  58. Anonymous9:18 AM

    Linda, how wonderful. I am a new bee keeper on Long Island NY and watching this has answered all my questions. I plan on harvesting today. Your honey is bee autiful!!!

    ReplyDelete
  59. Do you then freeze the jars of honey? Is it necessary to always freeze it in case there are wax moth or other bug larvae that may hatch , and if so how long do you freeze it for?

    ReplyDelete
    Replies
    1. You don't have to freeze all honey. You do need to freeze honey with honey comb in it - like cut comb honey or chunk honey. Those combs harbor wax moth larvae, etc. and you don't want your friend/customer to wake up one morning and find little worms swimming in your honey. Freezing for at least 24 hours kills the larvae and prevents this potential problem.

      Delete

Pin this post

LinkWithin

Related Posts Plugin for WordPress, Blogger...